|
CG-DA VGA in DVI out convertor
l Supports one VGA in to two single link DVI out l Supports LED indicator for signal input and DVI loaded l Auto-adapted the input signal of UXGA standard l The max resolution up to 1920×1080×60 l Supports parameter adjustion for everyone resolution l Supports horizontal, vertical position, clock rate, clock phase parameter adjustion l Supports panel or RS232 l AC 180~240V supply |
|
|
VGA in DVI out convertor |
|
|
Zoom |
|
|
|
Parameter |
【VGA In】 |
* |
Input Level(No offset) : |
0.4 VP-P~1.4 VP-P typical 0.7VP-P |
* |
Signal: |
Analog RGBHV |
* |
Coupling: |
DC coupling |
* |
RGB Impedance: |
75 Ω±1Ω |
* |
HV Impedance: |
1K Ω±10Ω |
* |
Bandwidth: |
165M Hz |
* |
Timing standard: |
UXGA of VESA |
* |
Connector: |
DB15 Female |
【DVI Out】 |
* |
Clock rate: |
25~170M Hz |
* |
Timing standard: |
DVI 1.0 of DDWG |
* |
Max clock rate: |
165M |
* |
Max resolution: |
1600×1200×60 |
* |
Out resolution: |
Same as input |
* |
Connector: |
DVI-I (only surport DVI-D signal) |
* |
Supports resolution: |
640×480×60/72/75/85、800×600×56/60/72/75/85、1024×768×60/70/75/85、1152×864×60/70/75/85、1280×960×60/70/75/85、1280×1024×60/70/75/85、1600×1200×60 |
【Other】 |
* |
Serial port connector |
DB9 Male (2 = TX, 3 = RX, 5 = GND) |
* |
Baud rate (b/s) |
9600 |
* |
Serial protocol |
8 data bits, 1 stop bit, no parity |
* |
Supply: |
AC180~240V 50Hz |
* |
Power: |
<10W |
* |
Operate temperature: |
0°C~40°C |
* |
Store temperature: |
-20°C~85°C |
* |
Enclosure dimensions: |
240mm × 150mm × 44mm | |
|
|